Xhorse Multi-Prog works well with Xhorse XDMPR8GL MQB RH850/V850 Adapter to read MQB48/MQB49/5C dashboards no need to cut wire or lift pin. The encrypt IMMO data read out can be used to make dealer key and add key by Xhorse VVDI2 key programmer.
VAG dashboards supported:
- VW 4th Gen Johnson Controls 34xx series
- MQB 34XX series
- MQB-RH850(R7F)series
Main steps to program MQB RH850/V850 key:
Step 1: Connect device, MQB RH850/V850 dashboard
Step 2: Read chip data by Multi Prog
Step 3: Make dealer key and add key by Xhorse VVDI2
In detail…
Here take 1402 instrument as an example.
Step 1: Connect devices, 1402 dashboard and PC
Run Multi- Prog software
Select Device>> 1402>> MQB-LOCK (R7F701402)- READ (VW-> MQB)>> Detail
Check Connection diagram
Follow the diagram to remove the 8 capacitors using a tweezer and heat gun
Scrape of the PCB mask before soldering the GND wire to the soldering point
Solder the wires of Xhorse MQB RH850/V850 Cable to the corresponding position on 1402 dashboard PCB according to the diagram
Secure the wires with acetate tape
Connect MQB RH850/V850 Adapter to Multi-Prog Programmer
Connect Multi-Prog and VVDI2 Programmer to the PC using different USB cables separately
Supply 12V power to Multi Prog as well
Step 2: Read chip data
Click on “Crack Reading”
Decode the chip and read the chip data successfully (time taken: 4min 1s 583ms)
Click on “Save file” to save the chip data
Step 3: Read IMMO data by VVDI2 software
Open VVDI2 software and select “VW”
Select Key Learn>> MQB platform instrument immobilizer>> Instrument with locked NEC35xx (MQB48, VDO/JCI)
Click on “Decode immodata”
Click on “Yes” to load the encrypt data read by Xhorse Multi-Prog
Open the file
Save the IMMO data file after decoding
Then you can use the data to make dealer key and add key in sequence.
Multi-Prog Programmer and VVDI2 also program key for the MQB RH850/V850 R7F701407 dashboard perfectly.
Besides, Xhorse VVDI Key Tool Plus Pad and Xhorse MQB-RH850/V850 Adapter also can calculate IMMO data to generate dealer and learn keys for VAG MQB RH850 (R7F) series, etc without cutting wires or lifting pins.
إرسال تعليق