Confirmed! OBDSTAR DC706 ECU Tool with ECM V30.61 can read/write EXT EEPROM and INT Flash data, read IMMO data, lock and unlock ECU on Bench successfully.
Requirements:
1.Require OBDSTAR MP001 Programmer, Bench A-V3 cable, Bench B-V2 cable to work with DC706;
2.Connect 12V power supply to DC706 and keep it working during the process;
3.Make sure the internet connection is normal during the process.
Procedures:
Select ECU Flasher>> ECM>> ECM V30.61>> BRAND- VOLKSWAGEN>> ECU BRAND- CONTINENTAL>> TYPE- PCR2.1>> VOLKSWAGEN CONTINENTAL PCR2.1 TC1796
Check the wiring diagram
| ECU | TOOL |
| B-Pin 5 | 12V (16) |
| B-Pin 92 | 12V (16) |
| B-Pin 1 | GND (4+5) |
| B-Pin 67 | CAN L (14) |
| B-Pin 68 | CAN H (6) |
| B-Pin 18 | GPT0 |
| B-Pin 23 | GPT1 |
| B-Pin 87 | IG |
Follow the wiring diagram to connect MP001 Programmer, OBDSTAR DC706 and VW PCR2.1 ECM via the corresponding cables correctly
After connection, click “Start” and select “Bench” and “MP001”
Click “Connect” to connect ECU
Then start to perform ECU read and write operation
Select the corresponding option to read and save EXT EEPROM and INT Flash data, and then select the corresponding file to write into a new VW PCR2.1 ECM
Go to read IMMO data, lock and unlock ECU as well, all works fine!
For more vehicle info, download OBDSTAR DC706 Vehicle Coverage (newest).
Post a Comment