How to program or delete BMW CAS3/CAS3+ Smart Key/Fob AKL via Launch X431 IMMO Plus/IMMO Elite or X-Prog3 key programmer?
It requires you to connect the programmer and vehicle correctly, and make sure the network has been connected well.
Operation Guide:
Select [IMMO] function on the main menu
Select BMW>> BMW/MINI Immobilizer Software V10.01
BMW Vehicle Support List:
| 1 Series E87 | 2007.03-2013 | CAS 3/ CAS 3+ |
| 3 Series E90/ E91 | 2004-2006.09 | CAS 2 |
| 3 Series E92/ E93 | 2004-2013 | CAS 3/ CAS 3+ |
| 3 Series E90/ E91 | 2006.09-2013 | CAS 3/ CAS 3+ |
| 5 Series E60/ E61 | 2004-2005.09 | CAS 2 |
| 5 Series E60/ E61 | 2006.09-2010 | CAS 3/ CAS 3+ |
| 5 Series F07/ F10 | 2009-2017 | CAS 4/ CAS 4+ |
| 5 Series F11 | 2010-2018 | CAS 4/ CAS 4+ |
| 5 Series F18 | 2011-2018 | CAS 4/ CAS 4+ |
| 6 Series E63/ E64 | 2003-2005.09 | CAS 2 |
| 6 Series E63/ E64 | 2006.09-2010 | CAS 3/ CAS 3+ |
| 6 Series F06/ F12/ F13 | 2011-2018 | CAS 4/ CAS 4+ |
| 7 Series E65/ E66/ E67/ E68 | 2001-2005 | CAS 1 |
| 7 Series E65/E66/E67/E68 | 2005-2008 | CAS2 |
| 7 Series F01/F02/F03/F04 | 2007-2015 | CAS4/ CAS 4+ |
| X1 E84 | 2009-2015 | CAS3/ CAS 3+ |
| X3 F25 | 2009-2017 | CAS4/ CAS 4+ |
| X4 F26 | 2013-2018 | CAS4/ CAS 4+ |
| X5 E70 | 2006-2013 | CAS3/ CAS 3+ |
| X6 E71 | 2007-2014 | CAS3/ CAS 3+ |
| X6 E72 | 2008-2011 | CAS3/ CAS 3+ |
| Z4 E89 | 2009-2016 | CAS3/ CAS 3+ |
| MINI R55/R56/R57 | 2005-2015 | CAS3/ CAS 3+ |
| MINI R58/R59/R60/R61 | 2010-2018 | CAS3/ CAS 3+ |
Connect X431 IMMO Plus/Elite and VCI connector via Bluetooth
Connect VCI and X431 X-prog3 to the vehicle via OBD cable at the same time
1.Generate BMW CAS3/CAS3+/CAS3++ Key All Keys Lost
Select Anti-Theft Key Matching>> Automatic Detection
Detect the current IMMO type is CAS3++
Click [Vehicle information], and confirm if it is correct
Click Key Operation>> Key Learning to generate a dealer key
Confirm the current CAS type is an encrypted version and all keys are lost
Reading RAM data…
Make sure there is no key in the ignition switch and go continue to read key data
Read key data successfully, and save it with a new file name
Backup key info successfully
Select an unknown key position (i.e. key 1) to generate by ignition switch
Select [Remote Key]
Put the key to be matched into the X431 X-Prog3 Programmer
Preprocess key successfully
Insert the key to be matched into the ignition switch to generate
Follow the prompt to generate the key until the vehicle can be started normally
The dealer key is generated successfully.
Return to the Function menu, and keep the vehicle start over 15 minutes and click [Synchronize DME] function no less than 10 times while starting the vehicle.
Path: Synchronize Operations>> Synchronize DME
2.Erase key with X431 IMMO Elite/IMMO Plus and X-Prog3
Back to Anti-Theft Key Matching main menu, select CAS3/CAS3+ IMMO>> MCU Operation>> 0M23S>> Display Connection Diagram
Connect to the ECU according to the wiring diagram
MCU V1 Adapter is required to connect with Launch X-prog3 key programmer
Then backup EEPROM data and backup FLASH data separately
Select one used key to erase (i.e.Key 1 just generated)
Erase the key successfully. The key 1 turns to unused status.
Done!
إرسال تعليق