OBDSTAR P50 Reset JMC R7F701009 Airbag ECU on Bench

OBDSTAR P50 with Airbag reset software V30.54 can reset some JMC airbag ECUs with R7F701008 memory. The JMC R7F701009  is also can be supported now, check the details below.

OBDSTAR P50 JMC Airbag ECU Support List (only some parts):

BrandPart NumberECU ManufactureMemoryMethodEcu Info.Read DTCErase DTCErase Crash
JMCCNHC15-14010-AACONTINENTALR7F701008BENCH
JMCHP1-14010-BACONTINENTALR7F701008BENCH
JMCJ38580687CONTINENTALR7F701008BENCH
JMCJ3858541CONTINENTALR7F701008BENCH
JMCJP1-14010-AACONTINENTALR7F701008BENCH
JMCKP2-14010-CACONTINENTALR7F701008BENCH
JMCKP2-14010-CBCONTINENTALR7F701008BENCH
JMCKP2-14010-DACONTINENTALR7F701008BENCH
JMCLC1-14010-AACONTINENTALR7F701008BENCH
JMCLP1-14010-AACONTINENTALR7F701008BENCH
JMCLP1-14010-ABCONTINENTALR7F701008BENCH
JMCJ38580738-P1360010011A0CONTINENTALR7F701009BENCH

JMC R7F701009 airbag ECU reset with P50:

1. Requirements

  • Keep P50 charging and make sure the network connection is normal during the operation, and then follow the operation guide in the tablet software to do step by step.

2. Menu path

Airbag Reset>> All>> Airbag Reset icon>> Airbag Reset V30.54>> BRAND>> FOTON>> FOTON J38580738-P1360010011A0 (CONTINENTAL) R7F701009 (BENCH)

3. Connect device and airbag ECU

Follow the Pinout to OBDSTAR P004 Adapter and airbag ECU via the P004 Jumper, and connect to P50 airbag reset tool via the main cable

Press the ON button on P004 Adapter after connection

4. Read ECU info

The airbag part number is the same as the airbag ECU

5. Read DTC

Detect the airbag fault code

6. Erase Crash

Erase the crash successfully, disconnect the 12V power supply and wait for 30 seconds, and then reconnect

7. Erase DTC

Erase DTC successfully

8. Read DTC again

No crash fault codes now!

JMC R7F701009 airbag ECU has been reset by OBDSTAR P50 Airbag ECU Tool perfectly.

Post a Comment

أحدث أقدم