Launch X431 ECU & TCU Programmer is a new ECU clone tool. It can work with PC software to read, write, and clone ECU & TCU, no need X-prog3 or X431 tablet.
Features:
- Read & write ECUs Data.
- Support two methods to read various vehicle brand ECUs info.
- Support Read the chip ID and Back up the EEPROM data.
- Support Back up the FLASH data and Restore EEPROM/FLASH data.
- Support Data Processing, anti-theft shutdown and file verification.
- Current adapter accessories as below:
- X-PROG3 Adapter Cable 1 (DQ200XX)
- X-PROG3 Adapter Cable 2 (VL381)
- X-PROG3 Adapter Cable 3 (DQ380)
- X-PROG3 Adapter Cable 4 (DQ250)
- X-PROG3 Adapter Cable 5 (DL501)
- X-PROG3 Adapter Cable 6 (DL382)
- X-PROG3 Adapter Cable 7 (VGS-NAG3)
- X-PROG3 Adapter Cable 8 (VGS2-FDCT/VGS-FDCT)
- X-PROG3 Adapter Cable 9 (VGS3-NAG2)
- X-PROG3 Adapter Cable 10 (8HP_V1(BMW/LR)/8HP_V2/8HP_V3)
- X-PROG3 Adapter Cable 11 (MPS6)
- X-PROG3 Adapter Cable 12 (DPS6)
- X-PROG3 Adapter Cable Main Line (ML)
Highlights:
- 2D menu, clear and easy to choose
- Powerful search function
- Convenient modification of ECU data
- USB communication, with a speed more than three times that of Android devices, making it more stable
- Easy to copy data
- Support engine data validation function
PC Software download link:
https://en.cnlaunch.com/products-detail/i-243.html
Click Download
Launch ECU & TCU Programmer Support List till June 2023:
| ECU Name | ECU Type | ECU Brand | G3 | FLEX |
| EDC16XX | ECM | Bosch | Support | Support |
| EDC17XX | ECM | Bosch | Support | Support |
| MD1CSXXX | ECM | Bosch | Support | Support |
| MD1CPXXX | ECM | Bosch | Support | Support |
| ME17.X.X | ECM | Bosch | Support | Support |
| MED17.X.X | ECM | Bosch | Support | Support |
| MED9.X.X | ECM | Bosch | Support | Support |
| MEV17.X.X | ECM | Bosch | Support | Support |
| MEVD17.X.X | ECM | Bosch | Support | Support |
| MG1CSXXX | ECM | Bosch | Support | Support |
| MG1CPXXX | ECM | Bosch | Support | Support |
| MSDXX | ECM | CONTINENTAL/SIEMENS | Support | Support |
| MSVXX | ECM | CONTINENTAL/SIEMENS | Support | Support |
| SDIX | ECM | Continental | Support | Support |
| GM EXX/TXX | ECM | DELCO | Support | Support |
| SIM271XX | ECM | Continental | Support | Support |
| SIMOS12.X | ECM | Continental | Not support | Support |
| SIMOS8.X | ECM | Continental | Support | Support |
| SIMOS-PCR2.X | ECM | Continental | Not support | Support |
| 6HPXX | TCM | ZF | Support | Support |
| 8HPXX | TCM | ZF | Support | Support |
| 7DCT300 | TCM | ZF | Support | Support |
| 9G Tronic | TCM | Bosch | Support | Support |
| ALXXX | TCM | ZF | Support | Support |
| TCXX | TCM | Bosch | Support | Support |
| DPS6/DC4 | TCM | GETRAG | Support | Support |
| DKG | TCM | GETRAG | Support | Support |
| DLXXX | TCM | Temic | Support | Support |
| DQXXX | TCM | Temic | Support | Support |
| MPS6 | TCM | GETRAG | Support | Support |
| SPS6 | TCM | GETRAG | Support | Support |
| VGSX | TCM | GETRAG | Support | Support |
| VL381 | TCM | Temic | Support | Support |
| GM 6TXX/6LXX | TCM | DELCO | Support | Support |
| MEDG17.9.8 | TCM | Bosch | Support | Support |
| MEG17.9.2 | TCM | Bosch | Support | Support |
X431 ECU & TCU Programmer connection diagrams (2 methods):
In bench mode:
Via gearbox adapter:
X431 ECU & TCU Programmer (PC version) vs. X-Prog3 + X431 Tablet:
Pros:
- Work standalone with PC software. No need Launch GIII X-Prog3 key programmerand X-431 tablet.
- Support VW Audi Porsche ECU cloning (thefunction is in the Data processing section).
- The connection is more convenient.
- It’s faster and more stable to read and write data (3x times faster than Android tablet).
- It’s more convenient to process and transferdata on PC.
- PC software adds MEDC17 ECUs IMMO off
Cons:
- Notsupport immobilizer and key programming. If you need to program keys, choose x-prog3 with x431 tablet.
NOTE:
X431 GIII is not recommended to be used with V+/Pros. It only adds the key programming function for German VAG, BMW and PORSCHE. These tablets only have Bluetooth interface, without USB interface, and cannot perform ECU TCU clone function. Only PAD V, PAD VII and IMMO tablets (X431 IMMO Elite/X431 IMMO Plus) can do ECU TCU CLONE.
How to use X-431 ECU & TCU Programmer and PC software:
https://blog.uobdii.com/how-to-use-launch-x431-ecu-tcu-programmer-and-pc-software/
2023 Launch X-431 ECU & TCU Programmer Standalone Cloning Device:
https://www.uobdii.com/wholesale/launch-x431-ecu-module-cloning-device.html
Post a Comment