As we known, after activating Xhorse MQB Authorization, Xhorse VVDI Key Tool Plus Pad or VVDI2+VVDI Prog can read MQB NEC35xx Locked IMMO Data to add new key and do all keys lost (AKL needs synchronize data by third-party). There are two wiring diagrams for using: by Lift PIN diagram and by Cut PIN diagram.
Xhorse devices required:
Xhorse VVDI Key Tool Plus Pad Full Configuration (has VW software and Prog function)
VVDI2 Full Version Plus VVDI Prog
Assistant tools recommended:
- Scaling powder
- Hot-air gun
- Enameled wire gummed paper
- Electron microscope
- Tweezer and operating knife with pointed tip
Tips to activate Xhorse VW MQB license:
- Register your Key Tool Plus Full Configuration/ VVDI2 programmer before activation
- Buy the Xhorse VW MQB Licenseand provide your device SN (incl. Key Tool Plus/Xhorse VVDI2 and VVDI Prog) to our customer service for activation.
- Once the MQB authorization is activated, please use the corresponding device to read data. If you use other programmerto read, then the VW MQB add key/all keys function will not be supported.
Part 1:
Read MQB NEC35xx IMMO data with VVDI Key Tool Plus
1.Xhorse Key Tool Plus MQB Dashboard NEC3525 Lift Pin & Cut Wire Tutorial
By Lift PIN diagram:
By Cut PIN diagram:
The guide to read MQB NEC3526 is the same as NEC3525.
By Cut PIN diagram:
2.Xhorse Key Tool Plus Pad MQB Dashboard NEC3532 Cut Wire Advanced Tutorial
By Cut PIN diagram:
3.How to read MQB Locked NEC35xx by VVDI Key Tool Plus
i.e MQB NEC3525 dashboard
Part 2: Read MQB NEC35xx IMMO data with Xhorse VVDI2+ VVDI Prog
i.e. MQB NEC3526
How to read MQB Dashboard Data by VVDI Prog and VVDI2By Lift PIN diagram:
By Cut PIN diagram:
Contact us at:
E-Mail: Sales@UOBDII.com
WhatsApp: +86-13995696053
Phone: +86 13995696053
Skype: UOBD2.COM
إرسال تعليق