Autel OTOFIX IM1 main function is key programming (it is an affordable alternative to Autel MaxiIM IM508), therefore, OTOFIX IM1 supports key programming for more than 2000 models of more than 60 car series. Moreover, OTOFIX IM1 has the abilities of diagnosis and service reset ((both with valid subscription). It features in Smart IMMO Functions, Advanced Features (Able to unlock more with subscription), One-stop Cloud Service (Remote Expert, RealFix, Device/Report Management).
Part 1. OTOFIX IM1 Key Programmer Vehicle Coverage:
https://www.otofixtech.com/vehicle-coverage/coverage2
Just choose product model: IM1 (IMMO), vehicle make, vehicle model, year, function / Sub-function, and then click on “Search”.
OTOFIX IM1 Smart IMMO Functions:
1). OBD key programming for 80% of vehicle models
2). Key programming via OBD for Volkswagen IV, V and MQB IMMO system
3). Add key and All Keys Lost programming via OBD from CAS1 to CAS4 and FEM&BDC IMMO system
4). Key programming bypassing PIN code for all 2005-2020 Ford models
5). Key programming bypassing PIN code for 2019-2020 Promaster, DT-RAM, Jeep Commander, etc.
6). Read password for Hyundai Kia key ID46, 47, 4A, 8A, etc.
Autel OTOFIX IM1 Smart IMMO Function Quick guide:
The IMMO application provides Smart Mode and Expert Mode to guide technicians performing IMMO related functions, including Key Learning, Remote Control Learning, Remote Control Add, and more.
Image 2. Sample Expert Selection Mode Function Screen
The IMMO operations require connecting the OTOFIX IM1 tablet to the test vehicle through the OTOFIX V1. To establish proper vehicle communication to the tablet, you need to perform the following steps:
Connect theV1to the vehicle’s DLC for both communication and power source.
Connect the V1to the tablet via Bluetoothor USB connection.
When the above steps are completed, check the VCI navigation button at the bottom bar on the screen. When a green check-mark badge appearsat the lower-right corner, theOTOFIX IM1 is ready to start vehicle diagnosis.
Vehicle Connection:
To connect the V1 to the test vehicle, simply insert the Vehicle Data Connector on the V1 into the vehicle’s DLC, which is generally located under the vehicle dashboard. The V1 will automatically power on.
NOTE:
The vehicle’s DLC is not always located under the dashboard. Refer to the user manual of the vehicle for additional connection information.
Part 1. OTOFIX IM1 Key Programmer Vehicle Coverage:
https://www.otofixtech.com/vehicle-coverage/coverage2
Just choose product model: IM1 (IMMO), vehicle make, vehicle model, year, function / Sub-function, and then click on “Search”.
OTOFIX IM1 Smart IMMO Functions:
1). OBD key programming for 80% of vehicle models
2). Key programming via OBD for Volkswagen IV, V and MQB IMMO system
3). Add key and All Keys Lost programming via OBD from CAS1 to CAS4 and FEM&BDC IMMO system
4). Key programming bypassing PIN code for all 2005-2020 Ford models
5). Key programming bypassing PIN code for 2019-2020 Promaster, DT-RAM, Jeep Commander, etc.
6). Read password for Hyundai Kia key ID46, 47, 4A, 8A, etc.
Autel OTOFIX IM1 Smart IMMO Function Quick guide:
The IMMO application provides Smart Mode and Expert Mode to guide technicians performing IMMO related functions, including Key Learning, Remote Control Learning, Remote Control Add, and more.
Image 1. Sample Function Menu in Smart Mode
Image 2. Sample Expert Selection Mode Function Screen
The IMMO operations require connecting the OTOFIX IM1 tablet to the test vehicle through the OTOFIX V1. To establish proper vehicle communication to the tablet, you need to perform the following steps:
Connect theV1to the vehicle’s DLC for both communication and power source.
Connect the V1to the tablet via Bluetoothor USB connection.
When the above steps are completed, check the VCI navigation button at the bottom bar on the screen. When a green check-mark badge appearsat the lower-right corner, theOTOFIX IM1 is ready to start vehicle diagnosis.
Vehicle Connection:
To connect the V1 to the test vehicle, simply insert the Vehicle Data Connector on the V1 into the vehicle’s DLC, which is generally located under the vehicle dashboard. The V1 will automatically power on.
NOTE:
The vehicle’s DLC is not always located under the dashboard. Refer to the user manual of the vehicle for additional connection information.
Source: https://blog.uobdii.com/otofix-im1-key-programmer-vehicle-coverage/
Post a Comment